-
Voltage Transient Emission (CTE)TestFor electrical/electronic components that belong to potential sources of conducted disturbances, transient conducted emission tests should be conducted.read more
-
High-Level Radio Frequency (RF) Field Compliance TestingWe offer radiated immunity testing using the reverberation chamber method for automotive components and airborne products.read more
-
High-Voltage Electrostatic Effect TestThis test system is used for: verification of high-voltage electrostatic effects during in-flight refueling (applicable to any aircraft refueling in flight), verification of high-voltageread more
-
Radiated Immunity (RS)TestRadiated Immunity (RS)Test is one of the most commonly used testing methods in electromagnetic compatibility testing, which uses the anechoic chamber method for testing.read more
-
Radiation Harassment (RE)TestRadiation Harassment (RE)Test is one of the most commonly used testing methods in electromagnetic compatibility testing, which uses the space radiation method for testing.read more
-
Electrostatic Discharge ESD TestingElectrostatic Discharge ESD Testing is conducted to test the ability of the tested component to resist human static electricity, simulating working conditions such as handling, maintenance, andread more
-
Wireless SRRC Certification and TestingSRRC certification is a mandatory certification system established by the Chinese government for radio equipment, telecommunications equipment, and products with radio frequency functions. Wirelessread more
-
Triplate TestingWith the electrification and intelligence of automobiles, more and more electronic products are entering the automotive industry. The electromagnetic compatibility of these electronic components hasread more
-
10m Semi Anechoic ChamberThe 10m semi anechoic chamber is used for radiation immunity testing and radiation emission compliance testing at distances of 10m or 3m.read more
-
Electromagnetic Protection System Design And ValidationElectromagnetic protection and electromagnetic compatibility:To some extent, electromagnetic compatibility and electromagnetic protection belong to a whole. There is an overlap in research contentread more
-
Product And System Electromagnetic Failure Analysis And T...GRGTEST based on a wealth of experience in the application of electromagnetic technology engineering and theoretical foundations, combined with powerful equipment and instrumentation simulation testread more
WEB4.3 Voltage transient emissions test 4.3.1 General This clause defines a test procedure to evaluate automotive electrical and electronic components for conducted emissions of...
WEBJan 19, 2011 · Conducted Transient Emissions (CTE) • CTE can be described as a short duration type of CE and can occur due to the use of various type of electromechanical devices (solenoid,...
WEBAug 1, 2012 · CTE is a measurement of the voltage transient that occurs when an inductive load such as a motor, solenoid or actuator is switched. Finally, various...
WEBTest voltage = 13,5 ± 0,5 or as specified by OEM (see FORD). Connect the DUT (disturbance source) via LISN (standard impedance) to the shunt resistor R s , the...
WEBEMC testing: • Radiated RF Emissions (RE) • Conducted RF Emissions (CE) • Radiated RF Immunity (RI) • Conducted Transient Immunity (CTI) • Conducted Transient...
WEBJan 1, 2013 · The method is demonstrated, exemplary, according to a voltage transient emission test along high voltage supply lines as proposed in the new draft standard...
