Service Content
Acceleration tests typically encompass the following modes:
1) Structural Testing
To verify the equipment structure's ability to withstand loads resulting from applied acceleration.
2) Performance/Functional Testing
To verify that the equipment's performance does not degrade when subjected to loads generated by applied acceleration and thereafter.
3) Crash Safety Testing
To verify that the equipment does not rupture or detach from its mounting bracket under the impact of crash acceleration.
Service Scope
The acceleration test method is applicable to material that is installed in mobile platforms such as aircraft, helicopters, aerospace vehicles, air-carried stores, ground-launched missiles, trains, ships, automotive vehicles, etc.
Test Standards
- GJB150.15A-2009 Environmental Test Methods for Military Equipment Laboratories - Part 15: Acceleration Test
- GJB150.15-1986 Environmental Test Methods for Military Equipment - Acceleration Test
- RTCA/DO-160G Airborne Equipment Environmental Testing and Procedures
- HB6167.16-2014 Environmental Conditions and Test Methods for Civil Aircraft Airborne Equipment - Part 16: Acceleration Test
For more testing standards, please contact our online customer service.
Qualifications
Certified by CMA, CNAS, and over 60 OEMs and Tier1.
Test Cycle
About 1-2 days
Service Background
The acceleration test is performed on a centrifuge to assure that material can structurally withstand the steady state inertia loads that are induced by platform acceleration, deceleration, and maneuver in the service environment, and can function without degradation during and following exposure to these forces. Acceleration tests are also used to assure that material does not become hazardous after exposure to crash loads.
Our Srengths
- GRGT has established 18 reliability and environmental laboratories.
- GRGT has the technical ability to carry out professional environmental reliability tests, including equipment six-performance design and analysis, equipment performance testing and failure analysis, competitive comparison testing, comprehensive environmental testing, mechanical environmental testing, climate environment reliability test, vehicle environmental testing, structural mechanics simulation analysis, material and process analysis and evaluation
- GRGT has conducted tensile testing of metallic materials for domestic and foreign airworthiness organizations such as EASA, FAA, CAAC, etc.
Equipment Introduction
Centrifugal Constant Acceleration Testing Machine:
- Acceleration: (0-100) g;
- Maximum load (per installation point): 200kg;
- The nominal installation calculation radius:2250mm;
- The maximum center of gravity height : 250mm;
- collection rings:120
- Working current :5A
Hot Tags: acceleration test, China acceleration test service provider, Mechanical shock tests, thermal shock test, cooling testing, insect resistance testing, mobile testing, ventilation testing
